Seamless gutters, repairs and leafguard systems
Available in a wide variety of colors that are a custom match your homes exterior.
While there are many reason that you need gutters installed on your home, there are three specific reasons. Installing gutters on your home will not only add value and style to your home, gutters will actually protect you from very costly maintenance expenses in the future.
Foundation Problems
The expansion and contraction of the soil that surrounds your home is the number one reason for slab failure. After a periods of rainy weather, the soil around the perimeter of your home expands as it becomes saturated with moisture. A dry, hot summer following the rain can cause the soil around your foundation to contract and pull away. As this cycle repeats, support to the foundation can be compromised leading to cracked masonry as well as sticking doors and windows. A properly designed and installed gutter system keeps the soil surrounding your home at a consistent moisture level by directing roof runoff safely away from the house.
Staining of Masonry and Siding
Rainwater cascading off an un-guttered roof will hit ground with enough force to cause a splash-back. Within this splash-back are dirt, grass and minerals that end up on the exterior of your home. Over a short period of time, a stain appears that can be difficult to remove or hide.
Damage to Landscaping
Plants, flowers, mulch and soil located under the drip line of an un-guttered roof can suffer from the water runoff of a thunderstorm. Additionally, this runoff can result in an over-watering condition that could permit harmful fungus to develop as well as attract ants, roaches and termites.
First of all, reflective foil is a TRUE radiant barrier. It reflects 97% of the radiant heat that hits it. RADIANT PAINT is by definition NOT a radiant barrier at all. It is defined as a radiant coating because at best it blocks 75%. A true radiant barrier MUST reflect 90% or higher to meet both RIMA and the U.S. Dept. of Energy's standards. See the chart below. Now, more on radiant barriers.
Radiant barriers are installed in homes—most commonly in attics—to reduce summer heat gain and winter heat loss, which helps lower heating and cooling costs. The barriers consist of a highly reflective material that reflects radiant heat rather than absorbing it. They don't, however, reduce heat conduction like thermal insulation materials.
How They Work
Heat travels from a warm area to a cool area by a combination of conduction, convection, and radiation. Heat flows by conduction from a hotter material to a colder material when the two materials touch. Heat transfer by convection occurs when a liquid or gas is heated, becomes less dense, and rises. Radiant heat travels in a straight line away from the hot surface and heats anything solid as the wave of energy hits it.
When the sun heats a roof, it's primarily the sun's radiant energy that makes the roof hot. A large portion of this heat travels by conduction through the roofing materials to the attic side of the roof. The hot roof material then radiates its gained heat energy into the cooler attic (some of the roof's heat will radiate in other directions too). A radiant barrier reduces the radiant heat transfer from the roof to the attic space.
A radiant barrier's performance is determined by three factors:
Emissivity (or emittance) – the ratio of the radiant energy (heat) leaving (being emitted by) a surface to that of a black body at the same temperature and with the same area. It's expressed as a number a between 0 and 1. The higher the number, the greater the emitted radiation.
Reflectivity (or reflectance) – a measure of how much radiant heat is reflected by a material. It's also expressed as a number between 0 and 1 (sometimes, it is given as a percentage between 0 and 100%). The higher the number, the greater the reflectivity.
The angle the heat wave strikes the surface—a right angle (perpendicular) usually works best.
All radiant barriers must have a low emittance (0.1 or less) and high reflectance (0.9 or more). RADIANT PAINT EMITS .25 AT BEST SO IT'S NOT A RADIANT BARRIER. Of these factors, the angle the heat wave strikes the surface has the most influence on how well any shiny surface acts as a thermal insulator. From one brand of radiant barrier to another, the reflectivity and emissivity are usually so similar that it makes little difference as far as thermal performance. (Most products have emissivities of 0.03–0.05, which is the same as a reflectivity of 97%–95%.) Also, the greater the temperature difference between the sides of the radiant barrier material, the greater the benefits a radiant barrier can offer.
Radiant barriers are more effective in hot climates than in cool climates. Some studies show that radiant barriers can lower cooling costs between 5%–10% when used in a warm, sunny climate. The reduced heat gain may even allow for a smaller air conditioning system. But in cool climates, it's usually more cost effective to install more than the minimum recommended level of insulation rather than a radiant barrier.
Types of Radiant Barriers
Radiant barriers come in a variety of forms, including reflective foil, reflective paint coatings, reflective metal roof shingles, reflective laminated roof sheathing, and even reflective chips, which can be mixed with loose-fill insulation. The reflective material, usually aluminum, is applied to one or both sides of a number of substrate materials. Substrate materials include kraft paper, plastic films, cardboard, plywood sheathing, and air infiltration barrier material. Some products are fiber reinforced to increase the durability and ease of handling.
Also, radiant barriers—which don't provide a significant amount of thermal insulation—can be combined with many types of insulation materials. These combinations are called reflective insulation systems. In these combinations, radiant barriers can also act as the insulation's facing material.
Installation
Radiant barriers can be installed between the roof sheathing and attic floor insulation, in cavity walls, and around door openings, water heaters, and pipes. It's easier to incorporate radiant barriers into a new home, but you can install them in an existing home too.
An installer typically drapes a rolled-foil radiant barrier foil-face down between the roof rafters to minimize dust accumulation on the reflective faces (double-faced radiant barriers are available). This is generally done just before the roof sheathing goes on if it's not too windy, but it can also be done afterwards from inside the attic by stapling it to the bottom of the rafters.
When installing a foil-type barrier, it's important to allow the material to "droop" between the attachment points to make at least a 1.0 inch (2.5 cm) air space between it and the bottom of the roof. This air space has mainly two functions: it creates an air channel for the soffit and ridge ventilation system to work more effectively, and it acts as a second reflector since there are two shiny sides (one facing up/ one facing down.)
Some builders also try to attach the radiant barrier directly onto the roof sheathing prior to their installation on the roof rafters. However, a more effective method is to simply buy foil-faced plywood sheathing instead. There are also metal roof shingles that have a reflective underside. If you need roof shingles, these are a practical option, but the cost of this type of radiant barrier is considerably higher than other types.
A radiant barrier installed on top of attic floor insulation is more susceptible to dust accumulation. This undesirable installation method may also trap moisture in fiber insulation during cold weather. A radiant barrier installed on the cold side of the insulation acts as a vapor barrier in the wrong location. When warm moisture carrying house air leaks into the attic in the winter, it may condense on the underside of the barrier. Even a perforated radiant barrier can trap moisture in cold climates since the water can freeze in the small holes and seal them. Because of these hazards, it's strongly recommended that you NOT apply radiant barriers directly on top of the attic floor insulation. Of course, installing them at all in a cold climate is not generally cost effective anyway.
A radiant barrier's effectiveness depends on proper installation. Therefore, it's best to have a certified installer do it.
If you want to install a radiant barrier yourself, obtain instructions and safety precautions from the manufacturer. Carefully study and follow these directions. You should also check your local building and fire codes.